Annepro 2 P1 Try Connecting Your Device Again

Anne Pro2 User Manual En

User Manual:

Open the PDF directly: View PDF .
Page Count: 1

105272

ANNE PRO 2 UserManual V1.0
- ANNE PRO 2
  - 1. Connect
    - 1.1 Connect over USB Cable
    - 1.2 Connect over Bluetooth
  - 2. Basic Function
    - 2.1 F1~ F12
    - 2.2 Direction Keys
    - 2.3 Other Keys
    - 2.4 TAP Layout
    - 2.5 Magic Fn
  - 3. Light Control
  - 4. Setup bluetooth
    - 4.1 Turn on Bluetooth broadcast
    - 4.2 Switch Host
    - 4.3 Bluetooth pairing with Windows 8/10
      - 4.3.1 Check if your computer supports BLE
      - 4.3.2 Pair with keyboard
    - 4.4 Bluetooth pairing with Mac OS X
  - 5. Technical Parameters
- ObinsLab Starter
  - 1. Getting Started
    - 1.1 Supported Platforms
    - 1.2 Installation
    - 1.3 Start Up
      - Windows
      - Mac OS X
  - 2. Qick Guide
    - 2.1 Device List
    - 2.2 Keyboard Setting
    - 2.3 Layout Setting
    - 2.4 Light Setting
    - 2.5 Macro Setting
  - 3 Firmware Upgrade
    - 3.1 ANNE PRO 2
    - 3.1 ANNE PRO

ANNE PRO 2 UserManual V1.0

ANNE PRO 2

1. Connect

1.1 Connect over USB Cable

1.2 Connect over Bluetooth

2. Basic Function

2.1 F1~ F12

2.2 Direction Keys

2.3 Other Keys

2.4 TAP Layout

2.5 Magic Fn

3. Light Control

4. Setup bluetooth

4.1 Turn on Bluetooth broadcast

4.2 Switch Host

4.3 Bluetooth pairing with Windows 8/10

4.3.1 Check if your computer supports BLE

4.3.2 Pair with keyboard

4.4 Bluetooth pairing with Mac OS X

5. Technical Parameters

ObinsLab Starter

1. Getting Started

1.1 Supported Platforms

1.2 Installation

1.3 Start Up

Windows

Mac OS X

2. Qick Guide

2.1 Device List

2.2 Keyboard Setting

2.3 Layout Setting

2.4 Light Setting

2.5 Macro Setting

3 Firmware Upgrade

3.1 ANNE PRO 2

3.1 ANNE PRO

ANNE PRO 2

ANNE PRO 2 is a 60% size bluetooth RGB mechanical keyboard, it's smart and save the space of

the desk. Although it only have 61 keys, it can used like a stand 104 keys keyboard by key

combination.

1. Connect

1.1 Connect over USB Cable

Connect Steps:

1. Turn o ﬀ the Bluetooth switch on the back of the keyboard

2. Connect your computer with a USB cable

1.2 Connect over Bluetooth

1. Turn on the Bluetooth switch on the back of the keyboard

2. Operate steps on computer, please refer to Chapter 4

2. Basic Function

2.1 F1~ F12

ANNE PRO 2 provide F1 ~ F12

F1 = FN1 + 1

F2 = FN1 + 2

F3 = FN1 + 3

F4 = FN1 + 4

F5 = FN1 + 5

F6 = FN1 + 6

F7 = FN1 + 7

F8 = FN1 + 8

F9 = FN1 + 9

F10 = FN1 + 0

F11 = FN1 + —

F12 = FN1 + +

2.2 Direction Keys

ANNE PRO 2 provide two groups of direction keys

FN1 + W = ↑

FN1 + A = ←

FN1 + S = !

FN1 + D = "

FN1 + I = ↑

FN1 + J = ←

FN1 + K = !

FN1 + L = "

2.3 Other Keys

FN1 + O = SCROOL LOCK

FN1 + P = PAUSE BREAK

FN1 + \| = PRINT SCREEN

FN1 + :; = PAGE UP

FN1 + '" = PAGE DOWN

FN1 + .> = INSERT

FN1 + /? = DELETE

FN1 + [{ = HOME

FN1 + ]} = END

2.4 TAP Layout

For default, ANNE PRO 2 turn the Tap Layout on, and set Right Shift for ↑ , FN1 for ← ,

FN2 for ! and Righ Control for ". So for example, when click Right Shift alone, the

function will be ↑.

You can completely customize your TAP Layout, or turn it oﬀ . Setup guide, please refer to

Layout Setting

2.5 Magic Fn

Magic Fn can been the copy of FN1 or FN2. By default, Magic Fn is oﬀ. To enable it, please refer

to the guide of Obinslab Starter at chapter 2.2

3. Light Control

ANNE PRO 2 presets a variety of lighting eﬀ ects.

To custom your own light eﬀect/ eﬀect group, please refer to the guid of Obinslab Starter

FN2 + 9 = Switch Light

FN2 + 0 = Trun Backlight On/Oﬀ

FN2 + - = Reduce Backlight Brightness

FN2 + + = Increase Backlight Brightness

4. Setup bluetooth

Before starting the next steps below, please conﬁrm that the Bluetooth switch is at

position On.

Detail about turn on the Bluetooth switch, please refer to Chapter 1.2

4.1 Turn on Bluetooth broadcast

Connect ANNE PRO 2 to a new host (Computer, Mobile, Pad etc), need Bluetooth pairing.

To do this, need turn on Bluetooth broadcast ﬁ rst.

FN2 + 1 5 Seconds = Turn on Bluetooth broadcast on position 1

FN2 + 2 5 Seconds = Turn on Bluetooth broadcast on position 2

FN2 + 3 5 Seconds = Turn on Bluetooth broadcast on position 3

FN2 + 4 5 Seconds = Turn on Bluetooth broadcast on position 4

4.2 Switch Host

Connect or switch ANNE PRO 2 to a paired host

FN2 + 1 = Switch to host saved on position 1

FN2 + 2 = Switch to host saved on position 2

FN2 + 3 = Switch to host saved on position 3

FN2 + 4 = Switch to host saved on position 4

4.3 Bluetooth pairing with Windows 8/10

4.3.1 Check if your computer supports BLE

If your computer does not support BLE, please purchase an adapter that supports BLE4.0.

1. Right click on the windows icon

2. Select Device Manager

3. If a MicroSoft Bluetooth Enumerator device is present, it means that the Bluetooth

module supports BLE devices. If not, you need to purchase an adapter that supports BLE

4.0

4.3.2 Pair with keyboard

1. Right click on the windows icon, select menu Setting

2. Select menu Bluetooth & other devices

3. Open the Bluethooth switch

4. Click Add Bluetooth or other device

5. Click Bluetooth

6. Select AnnePro2 to pair, wait 5-10s to complete binding

4.4 Bluetooth pairing with Mac OS X

1. Open Bluetooth setting window, click Pair button to pair with AnnePro2

2. Click Pair on pairing request window

Item Parameters

Wired USB (Windows 7/8/10 Mac  Linux)

Wireless Bluetooth LE 4.0 (Windows 8/10 Mac  Linux)

Size 97 * 284 * 40mm

Weight 635g

Battery 1900mAh

USB Input Voltage 5V DC

USB Working Current 500mA Max

System 32bit 64bit

Windows 7 √ √

Windows 8 √ √

Windows 10 √ √

Mac OS X -√

ObinsLab Starter

Obinslab Starter is a PC tool for ANNE PRO 2

1. Getting Started

1.1 Supported Platforms

1.2 Installation

1. Download the installation package: http://www.obins.net/occ/

2. Install

1.3 Start Up

The function of macro record need a special authorization, and some anti-virus software may

block it, please choose trust it.

Tips: Please always download Obinslab Starter from http://www.obins.net/obinslab-starter,

we can not guarantee the security of software downloaded from other channels.

Windows

Click the shortcut on the desktop

Mac OS X

The ﬁrst time launch Obinslab Starter, you will see the alert below, please authorize Obinslab

Starter by clicking Open System Preferences in the alert, then selecting the checkbox for

Obinslab Starter in the Privacy pane.

2. Qick Guide

2.1 Device List

1. Device List

Devices connected over USB cable.

Click Hello World to refresh device list(This usually does not need).

2. Setting

Switch Language

Switch Theme

Software update

3. Software Version

The current version of Obinslab Starter

2.2 Keyboard Setting

Information and general setting for the keyboard

1. Battery Battery indicator

2. Running Time Keyboard running time statistics

3. Layout

Default: Default keyboard layout

User: User customized keyboard layout

4. Tap

Disable: Turn oﬀ keyboard TAP layout.

Enable: Turn on keyboard TAP layout.

5. Magic Fn

Disable: Turn oﬀ Magic Fn

Fn1: Set Magic Fn to a copy of Fn1

Fn2: Set Magic Fn to a copy of Fn2

6. Macro

Disable: Turn oﬀ Macro.

Fn1: Set Fn1 to the hold key for trigger a Macro

Fn2: Set Fn2 to the hold key for trigger a Macro

7. CapsLock Led

Disable: Set CapsLock Led to default. If CapsLock on, led of CapsLock key will on.

All: If CapsLock on, led of all keycaps will on.

8. Reset Bluetooth Clear Bluetooth bound info saved on keyboard.

2.3 Layout Setting

1. Layout

Current: Layout read from keyboard. Qwerty, Mac, Dvorak: Preset layout.

Click on icon + to add a new layout

Right click on Current to Copy

Right click on preset layout to Copy/Recover(set to default)

Right click on user layout(added/copied) to Copy /Delete /Rename

Double click on user layout to Rename(Enter for save, Esc for cancel)

2. Key code table

Here list HID Key Code and ANNE PRO 2 special function keys

3. TOP

The default layout, tap to trigger

4. FN1

Hold Fn1 to trigger

5. FN2

Hold Fn2 to trigger

6. TAP

Usually set key code on modiﬁer key to extend it.

To use TAP, non't forget to enable TAP option at keyboard setting page

7. Download

Download the selected layout to keyboard.

If layout is seated to "Default", download a layout will rewrite it to "User" automatically

ANNE PRO 2 have four layers, they are TOP FN1  FN2  TAP.

There are two ways to update keycode:

Drag the selected keycap, and drop on another keycap

Select a keycap, choose new from **Key code table

2.4 Light Setting

1. Light Group

Click on icon + to add light group

Right click on custom light group item to Delete /Rename / Copy

Right click on the Default light group to Copy / Recover(set to default)

2. Light List

Click on icon + to add light eﬀect(Limited to max 16)

Click on light eﬀect to Rename / Copy / Delete

Right click on blank space to Paste the light eﬀect copied

Drag the light eﬀect to sort

3. Color Palette

Pick color on the color wheel

Pick color from Default /Custom color block

Right click on custom color block to save the current color

4. Setting Static Light

Setting static single or static multiple light eﬀ ect:

Select single/multiple keycap, and then pick a color on Color Palette

Click on blank space to clear selected keycaps

5. Dynamic Light Eﬀ ect

None: Static light eﬀect, RGB backlights on every keycap can be deﬁ ned

Breath/Breath grad/Rainbow/Breath single: Work together on Dynamic Light Color

Table

6. Dynamic Light Color Table

Setting color for Dynamic Light Eﬀ ect

7. Preview

Preview the selected light eﬀect on keyboard

8. Download All

Download the light eﬀects listed in the selected light group to keyboard

2.5 Macro Setting

1. Macro Group

Click on icon + to add macro group

Right click on macro group to Remane /Copy /Delete

Double click on macro group to Rename

2. Macro Key

Indicate the macro trigger position

Click on a blank keycap to Paste /Add macro(Limited to max 16)

Click on macro keycap to select a macro

Right click on macro keycap to Delete /Copy/ Paste

Drag on the macro keycap and drop on a blank keycap to update macro trigger

position

3. Rec Macro

Record a macro, the keycode typed in will show at Macro code

4. Macro Code

Show the macro code of selected

Insert time block

Move up/down the macro code block

Double click on time block to edit time(Enter for save, Esc for cancel)

Delete macro code block

5. Download

Download the macros listed in the selected macro group to the keyboard

3 Firmware Upgrade

3.1 ANNE PRO 2

In this page, you will get a list of ﬁ rmware.

For a better experience, we recommend upgrading to the latest.

Upgrade to latest

It's quite simple, just click the "Upgrade to Latest" button, what't all.

Abnormal recovery

If an accident(e.g. power failure, reboot, computer crash, and other unpredictable

situations) occurs during the ﬁrmware upgrade, the keyboard can't be used.

In this situation, you can use the abnormal recovery mode to recover the keyboard.

1. Turn o ﬀ the Bluetooth switch on the back of the keyboard

2. Hold on Esc, plug in the USB cable. Release Esc key while "USB-HID IAP" show up on

the screen

3. Select "USB-HID IAP" item to upgrade ﬁrmware again

Experimental Features

The features come with its share of annoyances and curiosities.

1. Use text edit software to open user-preference.json change isDev to true

The path of user-preference.json ,

on Windows is%appdata%\Obinslab Starter\storage

on Mac OS X is/Users/your-user-name/Library/Application

Support/Obinslab Starter/storage

2. Open/restart Obinslab Starter

3.1 ANNE PRO

Comming soon

{"theme":"dark" , "locale":"en" , "isDev":true }

cusackcoubjecruir92.blogspot.com

Source: https://usermanual.wiki/Document/AnnePro2UserManualen.1980077676/html

Annepro 2 P1 Try Connecting Your Device Again

Anne Pro2 User Manual En

0 Response to "Annepro 2 P1 Try Connecting Your Device Again"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel